Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Tuesday, July 24, 2012

Easy DIY Ruffle Top Dress Tutorial - My Maternity Dress Makeover!

I'm expecting... and when you're expecting there's 2 things you desperately want your clothes to be - comfortable and cute. But that's hard to come by... especially together!

I went hunting at the thrift store the other day and found this gem – a long-sleeved maternity dress that was literally just a giant t-shirt. Talk about comfortable! But not so cute.

Well, it’s summertime and I had a plan… time for a dress makeover!

You could do this with any t-shirt or skirt too.

Step 1: Cut off those long sleeves.
 
Step 2: Cut the sleeve scraps into strips.

We’re going to use the cutoff sleeves for ruffles!

Make each strip 2 ½ inches wide. I wanted 3 ruffles on my shirt. So I cut one strip 14 inches long and the other two strips I cut 7 inches long.

TIP: Cut your strips 2 times the length that you want them to be in the end. This gives your ruffles plenty of “flounce”. Example: Want a 7 inch ruffle? Cut a 14 inch strip of fabric.

Step 3: Sew big stitches about ¼ inch from the top of each strip. The pull one of the strings to make a ruffle.

Step 4: Pin the top ruffle in place (the 14 inch strip). Then stitch it on.

Make sure the ruffle is centered on the shirt.
 
Step 5: Pin the top of the next ruffle about 1 ½ inches below the top ruffle’s stitching. Sew it in place.

Repeat this step for as many ruffles as you like. I made the 2nd and 3rd ruffles shorter than the top one just for added spunk. :) 

 
The top is done. YAY! If you’re only doing a t-shirt, you can stop here. But I had an entire dress to doctor.
 
 
Now to fix the bottom of the t-shirt dress…

Step 6: Cut off the bottom of the skirt.

Since it went to the floor, I had plenty of fabric to play with. *Remember not to cut off too much! You can always make it shorter.

Step 7: Make the bottom ruffle.

Cut two strips that are 2 ½ inches wide. Sew them together to make one long strip of fabric. Sew using big stitches about ¼ inch from the top and pull one string to make the ruffle. Then sew the two ends together to make a circle.

Don’t trim those strings yet! You might need to pull the thread again to keep that ruffle “ruffling”.

Step 8: Pin the bottom ruffle in place. Sew across the top of the ruffle.


 
Ok, now you can trim the strings. 

And … Ta Da! Here’s my new cute dress that feels like a t-shirt without looking like one. Happy day! :)


Sunday, August 8, 2010

Baby Leggings Tutorial

I bought some pretty loud knee sox on clearance. The idea was to make baby leggings out of them.

So here's how it goes... First cut them off at the heel.

Then cut off the toe.

Take that short piece you just cut between the toe and
the heel and fold in half, wrong sides together. Pin.

Now pin that piece to the cut end of the long of the stocking.

Sew them together using a stretch stitch.

Should look something like this. (I serged them but don't have a picture.)
If you don't have a serger, just zigzag the seam.

The finished leggings. You could embellish them if you like.
All done.

AddThis Suggested Content